CHAMP- 3D

Producer: Apart

CHAMP-3D este un amplificator digital cu 3 canale. Avand aceleasi avantaje ale amplificatoarelor racite prin convectie, a fost imbunatatit prin adaugarea unui procesor de semnal digital, un EQ cu 4 benzi si controlul functiilor esentiale prin telecomanda RS-232. Modulele Hypex ce stau in inima amplificatorului ofera o calitate audio superioara. Pentru a face usoara conectarea boxelor are inclus un program Loudspeaker Wizard.

APART CHAMP-3D amplificator audio digital cu 3 canale.

  • Putere: boxe (stanga/dreapta) 367 W / 4 Ohmi, 522 W / 2 Ohmi;
  • subwoofer 1340 W / 2 Ohmi.
  • Banda de frecvente: 10 Hz - 24 kHz.
  • Raport semnal/zgomot: 90 dB.
  • Procesor DSP incorporat cu compresor/limitor, crossover, EQ cu 4 benzi.
  • Dimensiuni (I x L x A): 89 x 483 x 380 mm.
  • Greutate: 16 kg.
Dynamic program power per channel - Left/right amp 367 Watts @ 4 Ohm, 522 Watts @ 2.7Ohm
Sine wave power per channel left/right Amp 345 Watts @ 4 Ohm
Dynamic program power subwoofer channel 1340 Watts @ 2 Ohm
Sine wave power subwoofer channel 1100Watts @ 2 Ohm
Load impedance left/right amp 2.7 Ohm
Load impedance sub amp 2 Ohm
Input channels 2 x balanced XLR male, 2 x balanced XLR Female, 2 x balanced Euroblock
Input sensitivity 0 dBV/1V
Input impedance 10k
Liftable ground yes
S/N ratio >90dB A weighted
THD L/R amp <0.1% @ 100W/4Ohm/1kHz A weighted
THD sub amp <0.1% @500W/2Ohm/80kHz A weighted
Frequency response 10 – 24 kHz +0/-3 dB
Analog/digital volume control analog via external volume control, digital internal control
Built-in DSP yes, featuring compressor/limiter, Crossover, subwoofer phase control,4 band fully
parametric EQ, automatic loudness, speaker delay, APart speaker configuration wizard.
Crossover Linkwitz-Riley and Butterworth characteristics, 12 to 48 dB/oct or 6 dB/ Oct first order filter
Subsonic filter 48 dB/oct, between 10 and 80 Hz, defeatable
User interface display guided menu structure, 3 user security levels.
Protection circuits overcurrent, overtemperature, DC offset, AC and DC over- and undervoltage
Channel separation >80dB @ 1kHz
Damping factor > 400 all channels
APC system internal compressor and clip limiter, auto gain circuit
Power amp topology class D
Cooling convectional
External interface RS232 and external volume control 0-10V (1 mA closed loop circuit)
RS232 settings 19200 baudrate, 8 databits, no parity, no handshake
Max power consumption 1500Watts
Standby power consumption <1.5Watts
Mains operating voltage 230VAC/50-60Hz
Dimensions 483 x 89 x 380 mm (WxHxD) (without rubber feet, including rack ears)
Net weight 16 kg
Gross weight 18 kg