MA200

Producer: Apart

 Cu seria de amplificatoare MA200, echipa de proiectare Apart a creat niste aparate electronice unice si originale. Niciodata pana acum nu a existat un amplificator de mixer cu toate trasaturile necesare pentru a fi potrivit pentru aproape orice aplicatie.

 

APART MA200 mixer/amplificator audio. Putere: 200 W / 100 V (240 W maxim).

  • Banda de frecvente: 40 Hz - 25 kHz.
  • Raport semnal/zgomot: > 80 dB.
  • Phantom power 14V.
  • Conectori intrare/iesire: RCA.
  • Dimensiuni (I x L x A): 88 x 430 x 356 mm.
  • Greutate: 12.1 kg.

 

Input : MIC1 (Front / Rear) Bal. 1/4”Jack / Bal combo XLR-Jack, DIN5 (1.5mV), Euroblock. 14V phantom power via internal switch
Input : MIC2-3-4 XLR3 balanced (1.5 mV). 14V phantom power via internal switch
Input : Emergency input Balanced Euroblock (1V)
Input : AUX input RCA cinch (500 mV)
Input : CD input RCA cinch (500 mV)
Input : Tuner input RCA cinch (300 mV)
Input : LINE4 RCA cinch (200 mV)
Input : Power amp input RCA cinch (300 mV)
Output Power RMS : Rated 200 watt
Output Power RMS : Max 240 watt
Speaker output : Zone 1-3 On-off switch
Speaker output : Zone 4 Paging on-off, Music on-off
Output impedance 50V (12.5Ohm) - 70V (24.5Ohm) - 100V (50Ohm) - 8Ohm
Pre amp out RCA cinch (1V)
Record Out RCA cinch mono (1V)
Priority output power 24V activated by priority contact closure
Chime 2-tone chime activated by contact closure on Euroblock or DIN5. Volume adjustable
Priority system : Level 1: Emergency / Tel Euroblock (200 mV), mutes all inputs
Priority system : Level 2: VOX Mute On MIC 1 (0.6 mV), mutes mic 2,3 & 4 and line inputs
Level set by trimmer
Priority system : Level 3 contact closure : Mutes all line inputs
Limiter Dynamic limiter -3dB (red LED when active)
Frequency Range 40 Hz - 25 kHz
S/N Ratio : Amplifier Better than 95 dB, 22 Hz - 22 kHz
S/N Ratio : Line Better than 80 dB, 22 Hz - 22 kHz
S/N Ratio : Mic Better than 65 dB, 22 Hz - 22 kHz
Distortion <0.3% @ -6 dB, 1 kHz
Bass control ± 10 dB, 100 Hz
Treble control ± 10 dB, 10 kHz
Power supply 230 / 115 V DC or 24V DC
Dimensions (H x W x D) 88 x 430 x 356 mm, 19” brackets included
Weight 12.1 Kg